---
title: "Environmentally Friendly Air Cooler Installation Methods and Steps – Rundongfang"
url: https://tiercooling.com/posts/environmentally-friendly-air-cooler-installation-methods-and-steps-rundongfang/
date: 2022-02-04
modified: 2026-09-28
lang: en
author: "info@tiercooling.com"
description: "Based on the differences in climate and temperature across various regions, installing an environmentally friendly air cooler cooling solution in a factory is a good choice, and it is also..."
categories:
  - "News"
image: https://tiercooling.com/wp-content/uploads/2026/09/RDF-26ABT-0005-2.jpg
word_count: 363
---

# Environmentally Friendly Air Cooler Installation Methods and Steps – Rundongfang

　Based on the differences in climate and temperature across various regions, installing an **[environmentally friendly air cooler](https://rundongfang.com/projects)** cooling solution in a factory is a good choice, and it is also cost-effective. Environmentally friendly air coolers provide excellent cooling performance. Below, our factory cooling air conditioner company explains the methods and steps for **[environmentally friendly air cooler installation in Dongguan](https://rundongfang.com/projects)** for your reference.

![](https://rundongfang.com/wp-content/uploads/9-2.jpg)

　　First, pay attention to proper sealing and waterproofing of the ducts between indoor and outdoor areas to prevent rainwater leakage.
　　Second, the power supply should be equipped with an air switch, with power supplied directly to the outdoor main unit.
　　Third, for detailed installation methods, refer to the installation materials and follow the installation advice provided by the manufacturer.
　　Fourth, the air duct design should be as short as possible, as straight-line air delivery gives better results, meeting the requirements of minimal air resistance and minimal noise. This can reduce the number of air outlets and ensure even air distribution at each outlet.
　　Fifth, the bend radius of the ducts should be more than twice the duct diameter.

![](https://rundongfang.com/wp-content/uploads/7-1.jpg)

　　Sixth, the main duct air speed should be designed to be within 9 meters per second to 15 meters per second.
　　Seventh, the water source pressure should remain in the open state for extended periods, with water pressure greater than per square centimeter as required.
　　Eighth, install the unit in a location where the air supply direction aligns with the natural wind direction as much as possible, as this can enhance the air delivery effect.
　　Ninth, the best installation position is opposite to the exhaust fan, to prevent short-circuit air pressure loss.
　　Tenth, for the air cooler’s location, confirm that the structure can support the weight of the entire unit and the air supply ducts. When conditions allow, roof-penetration installation can be used, which improves maintainability and installation safety of the environmentally friendly air cooler.
　　Eleventh, when using wall-mounted installation, carefully check whether the wall can bear the operating load of the air cooler. If necessary, install support brackets and reinforce with wall-penetration screws.
　　Twelfth, take care to shield the unit from direct sunlight to prevent loss of cooling capacity, which would affect the overall performance of the energy-saving, environmentally friendly air cooler.